Choose your country and your preferred language to see localized content.
Products
Download our standard Bulk & Unit catalog drawings in the main 2D and 3D formats
Discover PSV Series
Discover EPS AS1 Series
Applications
Recycling applications
Food applications
Corporate
Careers
Code of Ethics
Rulmeca operates a Service centre fully dedicated to the repair and assembly of Motorized Pulleys
The PS/Qx and PS/Sx versions offer steel driven rollers with P1C - P2C pinions.An extremely wide range of pinions is available, covering a vast array of applications in terms of both drive torque, handling speed and maximum load admissible.This is the sturdiest driven series in the catalogue, and is used in a range of industrial sectors including steel and paper.On request, they can also be provided for tangential dual-chain drives in version P1D (offset sprockets) and P2D (fully exploitation of the drive from the dual chain).This series is intended for use at room temperatures of between -20°C and +100°C; other operating temperatures are admissible, subject to verification of the conditions of use.The maximum admissible speed depends on the load applied to each roller.
Materials
Material handling components for conveyors capable of guaranteeing high performance and the full functionality of the system.
An application that demands high performance requires a wide and high-quality range of material handling components for conveyors.
Material handling components studied and manufactured to guarantee easy cleaning and compliance with hygiene regulations.
Material handling components that guarantee rapid, fluid and precise transportation.
The term "Product execution" refers to a product variant that may differ in certain characteristics: material, type of transmission, capacity, size, etc.
It's base product is: PS
Plus
Optional
For the rollers diameter 76 and 89 mm, aluminium flanges are supplied separately in a special kit, composed by 2 elements and complete with zinc plated fixing bolts to assemble them in different ways. Attention: the screws must be tightened by torque wrench = 13 Nm
Although not special, information on this design is given. The rough or zinc plated steel tube “N” or “Z and J” rollers with “D” values as per table, can be covered with a soft, elastic and smooth surface (hardness 73 ShA) grey colour (RAL 9006) PVC (Polyvinylchloride) plastic tube, particularly resistant to chemical agents. It is normally used to protect the roller surfaces and mostly to avoid scratching painted, enamelled, smooth, etc. load, and in some cases to increase friction. The PVC lagging is simply fitted on the tube with excellent coupling thanks to elastic tightening. Application temperatures ranging from -10°C to +50°C.
Rilsan coated: heat treatment based on Rilsan Polyamide powders of light grey colour, with particular resistance characteristics to chemical agents and wear
Polyurethane lagging with 90 ± 5 Sh.A hardness, orange colour, a material which is particularly resistant to cuts, wear and abrasion. Hardness, colour and thickness can be supplied with other values on request.
Lagging with 70 ± 5 Sh.A hardness, with surface turned to 3 mm minimum thickness. On request the lagging can be with different hardnesses or thicknesses or with glued rubber, Adiprene, Neoprene and Silicone compatibily with the number of rollers requested.
Related case histories
Automation at the service of frozen.
Related products
Innovative, Oilless Solution for Efficient Pallet Transport and Warehouse Productivity
Rollers for medium and heavy loads
Fixed or adjustable double-friction rollers for heavy loads